Español

¿qué estás buscando? ?

Dejar un mensaje

Si está interesado en nuestros productos y desea conocer más detalles, deje un mensaje aquí, le responderemos lo antes posible.

Hogar Correa trapezoidal dentada con borde sin rematar

Direct Source: 26268120 Cogged V Belt for CLAAS HN2900Le with Aramid Cord

Direct Source: 26268120 Cogged V Belt for CLAAS HN2900Le with Aramid Cord

Every batch is tested to confirm it delivers the same fit and staying power as the original CLAAS part, so you can install it and confidently return to the field knowing the drive train will keep working harvest after harvest.

Marca :
Zhongliang, Liannong, Agreap, Rnupower, JDRE
Número de artículo :
HN
Certificado :
ISO9001, ISO14001, ISO45001 and ISO50001
Pago :
T/T
Origen del producto :
China
Puerto de embarque :
Shanghai Port, Ningbo Port, Tianjin Port, Lianyungang Port
plazo de entrega :
15-45 working days

Detalles del producto

This belt started life not on a drawing board alone, but inside the walls of our own 95，000‑square‑meter manufacturing campus. There, engineers who have spent decades studying agricultural drives worked alongside chemists in a CNAS‑certified lab to formulate a rubber compound that could survive the dust, heat, and relentless torque found inside CLAAS combine. The result is the 26268120 – a cogged V‑belt built to outlast ordinary replacements while delivering the exact performance intended.

Section	Dimensions		Manufacturing Length Range
Section	Top Width(mm)	Height(mm)	Min.(inch/mm)	Max.(inch/mm)
HN	57.2	25.0	78.7/2000	626/15900

What Makes It Different?

√ Aramid Cord That Refuses to Stretch: Most replacement belts use polyester cord, which gradually elongates under load and forces you to re‑tension the drive. Our belt uses parallel‑laid aramid filaments – the same material found in ballistic protection – to keep the belt dimensionally stable. Once you tension it, it stays tensioned.

√ Chloroprene Formulated for the Field: Standard rubber hardens and cracks when soaked in oil or baked by engine heat. Our lab‑developed chloroprene blend retains its flexibility from well below freezing up to high operating temperatures, and it shrugs off the abrasive dust that fills the air during harvest.

√ Cogged Profile, Cooler Running: The precision‑molded cogs on the inner circumference let the belt bend easily around the small pulleys of the drive. Less bending resistance means less internal friction, so the belt runs cooler and lasts longer – a critical advantage when the machine is running flat out.

√ Engineered Alongside the Original: Because we are a direct source supplier, we work from the same specifications as the original equipment manufacturer. The dimensions, the rubber hardness, the cord tension – everything is matched so that the belt drops into place and performs exactly as the original did when the combine was new.

Where it works?

✅ CLAAS Combine Harvester – primary and auxiliary drives

✅Any drive on a CLAAS combine that demands a cogged, high‑flex belt

✅ Applications where small pulley diameters and high cycle rates would quickly destroy a standard belt

Technical Specifications & Applications

Part Number: 26268120
Type: Cogged V-Belt
Primary Application: CLAAS Combine Harvesters
Core Tensile Member: High-Strength Aramid Cord
Cover Compound: Special Formula Chloroprene Rubber
Quality Validation: CNAS-Certified Laboratory tested

ETIQUETAS CALIENTES :

CLAAS Combine Belt 26268120

Oil Resistant Agricultural Belt

Kevlar Reinforced Agricultural Belt

Stretch Free V-belt

Reemplazo OEM para CLAAS

HN 2900Le Cogged Belt

Dejar un mensaje

Si está interesado en nuestros productos y desea conocer más detalles, deje un mensaje aquí, le responderemos lo antes posible.

Productos relacionados

Correa agrícola dentada de velocidad variable HG HH HI HJ HK HL HM HN HO

Esta serie premium de correas trapezoidales dentadas de velocidad variable HG HH HI HJ HK HM HN HO ofrece un agarre y una flexibilidad excepcionales para maximizar la eficiencia energética en aplicaciones agrícolas. Está diseñada para resistir el polvo, la humedad y las temperaturas extremas, lo que prolonga su vida útil.

68x24x2600Ld Aramid Reinforced Cogged Harvester Belt for Rostselmash Gomselmash

The 68x24x2600Ld cogged V belt is precision engineered as a direct aftermarket replacement for Rostselmash （Gomselmash） combine harvesters where reliable power transmission under heavy harvesting loads is non negotiable . We manufacture this belt from the ground up in our 95000 square meter production complex reinforcing it with high tenacity aramid cord that virtually eliminates stretching and a specially formulated chloroprene rubber compound developed in our CNAS accredited laboratory and protected by national patents .

Direct Source: 26268120 Cogged V Belt for CLAAS HN2900Le with Aramid Cord

The 26268120 cogged V-belt is purpose‑built for the CLAAS combine harvester, where it must endure constant flexing and heavy shock loads. We engineer this belt from scratch in our own 95，000㎡ production complex, reinforcing it with high‑tenacity aramid cord that virtually eliminates stretching and a proprietary chloroprene compound developed in our CNAS‑accredited laboratory. Every batch is tested to confirm it delivers the same fit and staying power as the original CLAAS part, so you can install it and confidently return to the field knowing the drive train will keep working harvest after harvest.

Direct Source: 47486562 Combine V-Belt for CLAAS

The 47486562 is a high-performance cogged V-belt engineered for CLAAS combine harvesters, specifically designed for the HL 2855Le drive system. Manufactured in our 95，000㎡ production base with CNAS-certified laboratory validation and backed by 90+ national patents, this belt features a high-strength aramid cord core and a specially formulated chloroprene rubber compound, delivering OEM-identical performance, exceptional durability, and direct-from-source reliability.

AX BX CX DX ZX AV Correa trapezoidal dentada clásica

La correa trapezoidal dentada (también llamada correa trapezoidal dentada) es una correa de transmisión de potencia que combina la sección trapezoidal de las correas trapezoidales clásicas con ranuras transversales (dientes) moldeadas en su interior. Estas ranuras reducen la resistencia a la flexión, mejoran la flexibilidad y optimizan la disipación de calor, manteniendo al mismo tiempo una alta capacidad de par.

HZX HAX AX HBX BX HCX CX HDX DX HDJX Correa trapezoidal dentada de alta resistencia

La correa trapezoidal agrícola dentada de alta resistencia es una correa de transmisión de potencia especializada, diseñada para condiciones de funcionamiento extremas en maquinaria agrícola. Combina una superficie interior dentada (ranuras transversales) para una mayor flexibilidad y disipación del calor, una construcción reforzada con elementos de tracción de alta resistencia y cubiertas resistentes a la abrasión, y compuestos específicos para la agricultura que soportan condiciones ambientales adversas como el polvo, la humedad y la exposición a los rayos UV. Estas correas están diseñadas para transmitir alto torque en aplicaciones con cargas de impacto, velocidades variables y operación continua.

Correa trapezoidal dentada de cuña XPA XPB XPC XPZ

XPA XPB XPC XPZ son correas trapezoidales de cuña dentada de alto rendimiento. Su construcción garantiza un movimiento estable y uniforme en poleas ranuradas, evitando giros y deslizamientos. El diseño dentado mejora la flexibilidad, reduce la acumulación de calor y permite un funcionamiento eficiente en poleas de transmisión más pequeñas.

CONTÁCTANOS